Solid Brass Stair Nosings
with Ribbed Treads
|
|
On this page you will find a range of solid brass stair nosings with ribbed treads in gauges ranging from 2mm up to 4.6mm.
There are stair nosing details for fitting onto steps as a retro fit installation and stair nosing details to butt up to floorings.
Sections that allow the tread section to be extended are also available.
Stair nosings can be supplied in stock lengths or cut to size for your convenience.
Drilling options available:
If you cannot see the section you require please contact us, we also offer a bespoke service and can help find a solution.
For further information please contact sales on 01582 561500, or send an email here.
There are stair nosing details for fitting onto steps as a retro fit installation and stair nosing details to butt up to floorings.
Sections that allow the tread section to be extended are also available.
Stair nosings can be supplied in stock lengths or cut to size for your convenience.
Drilling options available:
- Drilled for countersunk screws - supplied countersunk drilled
- Drilled for concealing pips - supplied with smooth brass concealing pips
- Undrilled for adhesive fixing - supplied undrilled.
Adhesion advice available
If you cannot see the section you require please contact us, we also offer a bespoke service and can help find a solution.
For further information please contact sales on 01582 561500, or send an email here.
|
BN1
Ribbed Tread Brass Stair Nosing SRV: Low Risk Potential Dry - 73 / Wet - 45 BN1 Tread can be extended using BTI25 and BTI52 BN1 Is suitable for use with BNE carpet naplock detail to trap and protect the edge of carpet 
|
Maximum Length: 3.2m
Stair Nosings Supplied: Highly Polished Brass as standard Special Finishes Available: Satin Brass • Antique Brass • Antique Bronze Drilling Options: Undrilled • Drilled for Countersunk Screws • Drilled for Smooth Plugs Supplied: Stock Lengths or cut to maximum sizes stated Matching screws available to order 
| ||
|
BN7
Ribbed Tread Brass Stair Nosing SRV: Low Risk Potential Dry - 73 / Wet - 45 BN7 Tread can be extended using BTI25 and BTI52 BN7 Is suitable for use with BNE carpet naplock detail to trap and protect the edge of carpet 
|
Maximum Length: 2.5m
Stair Nosings Supplied: Highly Polished Brass as standard Special Finishes Available: Satin Brass • Antique Brass • Antique Bronze Drilling Options: Undrilled • Drilled for Countersunk Screws • Drilled for Smooth Plugs Supplied: Stock Lengths or cut to maximum sizes stated Matching screws available to order 
| ||
|
BN4
Ribbed Tread Brass Stair Nosing SRV: Low Risk Potential Dry - 73 / Wet - 45 BN4 Tread can be extended using BTI25 and BTI52 BN4 Is suitable for use with BNE carpet naplock detail to trap and protect the edge of carpet 
|
Maximum Length: 3.2m
Stair Nosings Supplied: Highly Polished Brass as standard Special Finishes Available: Satin Brass • Antique Brass • Antique Bronze Drilling Options: Undrilled • Drilled for Countersunk Screws • Drilled for Smooth Plugs Supplied: Stock Lengths or cut to maximum sizes stated Matching screws available to order 
| ||
|
BN67
Ribbed Tread Brass Stair Nosing SRV: Low Risk Potential Dry - 73 / Wet - 45 BN67 Tread can be extended using BTI25 and BTI52 BN67 Is suitable for use with BNE carpet naplock detail to trap and protect the edge of carpet 
|
Maximum Length: 3.2m
Stair Nosings Supplied: Highly Polished Brass as standard Special Finishes Available: Satin Brass • Antique Brass • Antique Bronze Drilling Options: Undrilled • Drilled for Countersunk Screws • Drilled for Smooth Plugs Supplied: Stock Lengths or cut to maximum sizes stated Matching screws available to order 
| ||
|
BN67R 83° Raked Back
Ribbed Tread Brass Stair Nosing SRV: Low Risk Potential Dry - 73 / Wet - 45 BN67R Tread can be extended using BTI25 and BTI52 BN67R Is suitable for use with BNE carpet naplock detail to trap and protect the edge of carpet 
|
Maximum Length: 2.5m
Stair Nosings Supplied: Highly Polished Brass as standard Special Finishes Available: Satin Brass • Antique Brass • Antique Bronze Drilling Options: Undrilled • Drilled for Countersunk Screws • Drilled for Smooth Plugs Supplied: Stock Lengths or cut to maximum sizes stated Matching screws available to order
| ||
|
BN2
Ribbed Tread Brass Stair Nosing SRV: Low Risk Potential Dry - 73 / Wet - 45 BN2 Tread can be extended using BTI25 and BTI52 BN2 Is suitable for use with BNE carpet naplock detail to trap and protect the edge of carpet 
|
Maximum Length: 3.2m
Stair Nosings Supplied: Highly Polished Brass as standard Special Finishes Available: Satin Brass • Antique Brass • Antique Bronze Drilling Options: Undrilled • Drilled for Countersunk Screws • Drilled for Smooth Plugs Supplied: Stock Lengths or cut to maximum sizes stated Matching screws available to order 
| ||
|
BN11
Ribbed Tread Brass Stair Nosing SRV: Low Risk Potential Dry - 73 / Wet - 45 BN11 Tread can be extended using BTI25 and BTI52 BN11 Is suitable for use with BNE carpet naplock detail to trap and protect the edge of carpet 
|
Maximum Length: 3.2m
Stair Nosings Supplied: Highly Polished Brass as standard Special Finishes Available: Satin Brass • Antique Brass • Antique Bronze Drilling Options: Undrilled • Drilled for Countersunk Screws • Drilled for Smooth Plugs Supplied: Stock Lengths or cut to maximum sizes stated Matching screws available to order 
| ||
|
BN90
Ribbed Tread Brass Stair Nosing SRV: Low Risk Potential Dry - 73 / Wet - 45 BN90 Tread can be extended using BTI25 and BTI52 BN90 Is suitable for use with BNE carpet naplock detail to trap and protect the edge of carpet 
|
Maximum Length: 3.2m
Stair Nosings Supplied: Highly Polished Brass as standard Special Finishes Available: Satin Brass • Antique Brass • Antique Bronze Drilling Options: Undrilled • Drilled for Countersunk Screws • Drilled for Smooth Plugs Supplied: Stock Lengths or cut to maximum sizes stated Matching screws available to order 
| ||
|
BNE
Brass Nap Detail for Stair Nosings For use with stair nosings on the back edge to protect the edge of carpet 
|
Maximum Length: 2.715m
Stair Nosings Supplied: Highly Polished Brass as standard Special Finishes Available: Satin Brass • Antique Brass • Antique Bronze Supplied: Stock Lengths or cut to maximum sizes stated 
| ||
|
BN9
Slimline Ribbed Tread Brass Stair Nosing SRV: Low Risk Potential Dry - 73 / Wet - 45 BN9 has a back edge thickness of only 2mm, extremely popular for when a subtle and sleek look is desired. 
|
Maximum Length: 3.2m
Stair Nosings Supplied: Highly Polished Brass as standard Special Finishes Available: Satin Brass • Antique Brass • Antique Bronze Drilling Options: Undrilled • Drilled for Countersunk Screws • Drilled for Smooth Plugs Supplied: Stock Lengths or cut to maximum sizes stated Matching screws available to order 
| ||
|
BN9R 83° Raked Back
Slimline Ribbed Tread Brass Stair Nosing SRV: Low Risk Potential Dry - 73 / Wet - 45 BN9R 83° raked back profile has a back edge thickness of only 2mm, extremely popular for when a subtle and sleek look is desired. |
Maximum Length: 2.5m
Stair Nosings Supplied: Highly Polished Brass as standard Special Finishes Available: Satin Brass • Antique Brass • Antique Bronze Drilling Options: Undrilled • Drilled for Countersunk Screws • Drilled for Smooth Plugs Supplied: Stock Lengths or cut to maximum sizes stated Matching screws available to order |
|
| ||
|
BN1SLR
Slimline Ribbed Tread Brass Stair Nosing with Ramp Back Edge SRV: Low Risk Potential Dry - 73 / Wet - 45 BN1SLR has a ramped back edge, perfect for retro fit applications. 
|
Maximum Length: 3.2m
Stair Nosings Supplied: Highly Polished Brass as standard Special Finishes Available: Satin Brass • Antique Brass • Antique Bronze Drilling Options: Undrilled • Drilled for Countersunk Screws • Drilled for Smooth Plugs Supplied: Stock Lengths or cut to maximum sizes stated Matching screws available to order 
| ||
|
BN1SLR-R 83° Raked Back
Slimline Ribbed Tread Brass Stair Nosing with Ramp Back Edge SRV: Low Risk Potential Dry - 73 / Wet - 45 BN1SLR-R 83° raked back profile has a ramped back edge, perfect for retro fit applications. |
Maximum Length: 2.5m
Stair Nosings Supplied: Highly Polished Brass as standard Special Finishes Available: Satin Brass • Antique Brass • Antique Bronze Drilling Options: Undrilled • Drilled for Countersunk Screws • Drilled for Smooth Plugs Supplied: Stock Lengths or cut to maximum sizes stated Matching screws available to order |
|
| ||
|
BN1SLR15
Slimline Ribbed Tread Brass Stair Nosing with Ramp Back Edge SRV: Low Risk Potential Dry - 73 / Wet - 45 BN1SLR15 has a ramped back edge and a 15mm nose section, perfect for retro fit applications. 
|
Maximum Length: 3.2m
Stair Nosings Supplied: Highly Polished Brass as standard Special Finishes Available: Satin Brass • Antique Brass • Antique Bronze Drilling Options: Undrilled • Drilled for Countersunk Screws • Drilled for Smooth Plugs Supplied: Stock Lengths or cut to maximum sizes stated Matching screws available to order 
| ||
|
BN1SLR15R
Slimline Ribbed Tread Brass Stair Nosing with Ramp Back Edge SRV: Low Risk Potential Dry - 73 / Wet - 45 BN1SLR15R 83° raked back profile has a ramped back edge and a 15mm nose section, perfect for retro fit applications. |
Maximum Length: 2.5m
Stair Nosings Supplied: Highly Polished Brass as standard Special Finishes Available: Satin Brass • Antique Brass • Antique Bronze Drilling Options: Undrilled • Drilled for Countersunk Screws • Drilled for Smooth Plugs Supplied: Stock Lengths or cut to maximum sizes stated Matching screws available to order |
|
| ||
|
BN2SLR
Slimline Ribbed Tread Brass Stair Nosing with Ramp Back Edge SRV: Low Risk Potential Dry - 73 / Wet - 45 BN2SLR bull nose profile has a ramped back edge, perfect for retro fit applications. 
|
Maximum Length: 3.2m
Stair Nosings Supplied: Highly Polished Brass as standard Special Finishes Available: Satin Brass • Antique Brass • Antique Bronze Drilling Options: Undrilled • Drilled for Countersunk Screws • Drilled for Smooth Plugs Supplied: Stock Lengths or cut to maximum sizes stated Matching screws available to order
| ||
|
| ||||
|
| ||||
| stair_nosing_technical_special_finishes.pdf |